NSN 5305-01-492-9819
High Torque Screw
1.407 inches fastener length, flat countersunk undercut head style, between 0.623 inches and 0.633 inches head diameter, head height: 0.138 inches .
Manufacturer part number TX1026C5-15A for national stock number 5305014929819.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-492-9819.
-
MPN or Model
TX1026C5-15A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3 -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
1.407 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.623 inches and 0.633 inches -
Head Height
0.138 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
Cross recess type ii -
End Application
F-22 acft -
Thread Diameter
0.312 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt -
Material
Nickel alloy 718 -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-00-896-0775 MPN AIC811-5-14Socket Head Cap Screw
- 5305-01-046-3241 MPN BACS12CK3U9Machine Screw
- 5305-01-196-5089 MPN C9535-7-38Close Tolerance Screw
- 5305-01-205-9166 MPN AIC984-3-12Close Tolerance Screw
- 5305-01-266-7322 MPN A1102S08-3Machine Screw
- 5305-01-478-8174 MPN TX1026D4-12AClose Toleran Screw
- 5305-01-486-1326 MPN AIC618-4D7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-492-9819 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TX1026C5-15A | Alcoa Global Fasteners, Inc. |
TX1026C5-15A | Sps Technologies, Llc |
TX1026C5-15A | Arconic Global Fasteners & Rings, |