NSN 5305-01-494-8077
High Torque Screw
Between 0.490 inches and 0.510 inches fastener length, flat countersunk undercut head style, between 0.575 inches and 0.635 inches head diameter, head height: between 0.088 inches and 0.090 inches .
Manufacturer part number HT4020-5-8 for national stock number 5305014948077.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-494-8077.
-
MPN or Model
HT4020-5-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.505 inches and 0.572 inches -
Fastener Length
Between 0.490 inches and 0.510 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.575 inches and 0.635 inches -
Head Height
Between 0.088 inches and 0.090 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.3125 inches -
Grip Length
Between 1.015 inches and 1.062 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
99.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-040-9453 MPN ST3M454-5D34Close Tolerance Screw
- 5305-01-386-2977 MPN 123992-5-12Close Tolerance Screw
- 5305-01-391-5469 MPN 111290-08-10Machine Screw
- 5305-01-494-0615 MPN TX1027C4D11AClose Tolerance Screw
- 5320-01-356-6192 MPN HLT452SS-10-8Pin-rivet
- 5320-01-390-8514 MPN HST527DL-12-16Pin-rivet
- 5320-01-391-2860 MPN HST529DL-8-8Pin-rivet
- 5320-01-391-4354 MPN HST528DL-8-8Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-494-8077 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-5-8 | Huck International, Inc. |
ST3M652C5-8D | Boeing Company, The |
11925C5-8D | Reid Products Inc. |
HT4020-5-8 | Hi-shear Corporation |
HT4020-5-8 | Sps Technologies, Llc |
HT4020-5-8 | Alcoa Global Fasteners, Inc. |
HT4020-5-8 | Sps Technologies Ltd Tj Brooks |
HT4020-5-8 | Lisi Aerospace Canada Corp |
HT4020-5-8 | Sps Technologies Inc |
HT4020-5-8 | Huck Intl Inc |