NSN 5305-01-494-8119
High Torque Screw
Between 1.677 inches and 1.697 inches fastener length, flat countersunk undercut head style, between 0.575 inches and 0.635 inches head diameter, head height: between 0.088 inches and 0.090 inches .
Manufacturer part number HT4020-5-19 for national stock number 5305014948119.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-494-8119.
-
MPN or Model
HT4020-5-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.505 inches and 0.572 inches -
Fastener Length
Between 1.677 inches and 1.697 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.575 inches and 0.635 inches -
Head Height
Between 0.088 inches and 0.090 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.3125 inches -
Grip Length
Between 1.177 inches and 1.197 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
99.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-101-3326 MPN 3M926-4L5Close Tolerance Screw
- 5305-01-393-4200 MPN HT4024L4-11MClose Tolerance Screw
- 5306-01-271-3088 MPN GB511FJ6D15LShear Bolt
- 5320-00-401-5691 MPN HL911-8-17Pin-rivet
- 5320-01-142-3230 MPN HLT51YC-5-2Pin-rivet
- 5320-01-144-9607 MPN HLT153TB-12-13Pin-rivet
- 5320-01-364-9271 MPN HLT452SS-12-24Pin-rivet
- 5320-01-391-5432 MPN HST529DL-8-16Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-494-8119 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-5-19 | Huck International, Inc. |
ST3M652C5-19D | Boeing Company, The |
11925C5-19D | Reid Products Inc. |
HT4020-5-19 | Hi-shear Corporation |
HT4020-5-19 | Sps Technologies, Llc |
HT4020-5-19 | Alcoa Global Fasteners, Inc. |
HT4020-5-19 | Sps Technologies Ltd Tj Brooks |
HT4020-5-19 | Lisi Aerospace Canada Corp |
HT4020-5-19 | Sps Technologies Inc |
HT4020-5-19 | Huck Intl Inc |