NSN 5305-01-496-9216
High Torque Screw
Between 2.015 inches and 2.062 inches fastener length, flat countersunk undercut head style, between 0.881 inches and 0.888 inches head diameter, head height: between 0.130 inches and 0.133 inches .
Manufacturer part number ST3M652C7-22D for national stock number 5305014969216.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-496-9216.
-
MPN or Model
ST3M652C7-22D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.656 inches -
Fastener Length
Between 2.015 inches and 2.062 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.881 inches and 0.888 inches -
Head Height
Between 0.130 inches and 0.133 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
Internal Drive Style
High-torque -
End Application
Cbil for c/d/ -
Thread Diameter
0.438 inches -
Grip Length
1.375 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams5629, comp xm-13 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-787-9568 MPN 51B333-11Close Tolerance Screw
- 5305-00-816-2625 MPN 51B222-8HMachine Screw
- 5305-01-003-5925 MPN SC2219C4-302Close Tolerance Screw
- 5305-01-050-4309 MPN HT4008-3-7Shoulder Screw
- 5305-01-072-4705 MPN HT4016-4-12XShoulder Screw
- 5305-01-084-4693 MPN HT4016-3-8XShoulder Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-183-6985 MPN HT4069-4-5AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-496-9216 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M652C7-22D | Boeing Company, The |
11925C7-22D | Reid Products Inc. |
HT4020-7-22D | Arconic Global Fasteners & Rings, |
HT2040-7-22D | Hi-shear Corporation |
HT2040-7-22D | Sps Technologies, Llc |
WC4020-7-22 | West Coast Aerospace Inc |
HT2040-7-22D | Sps Technologies Ltd Tj Brooks |
HT2040-7-22D | Lisi Aerospace Canada Corp |