NSN 5305-01-519-1481
High Torque Screw
1.422 inches fastener length, undercut pan no. 2 head style, 0.482 inches head diameter, head height: 0.168 inches .
Manufacturer part number 120-259V4A15 for national stock number 5305015191481.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-519-1481.
-
MPN or Model
120-259V4A15
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.298 inches -
Fastener Length
1.422 inches -
Head Style
Undercut pan no. 2 -
Head Diameter
0.482 inches -
Head Height
0.168 inches -
Spline Major Diameter
0.221 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Internal Drive Style
Torx -
End Application
Mv-22 (v-22 lrip1) -
Thread Diameter
0.250 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
5820 pounds per square inch -
Part Name Assigned By Controlling Agency
Screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu -
Material
Titanium alloy uns r54520 -
Material Specification
Ams 4928 federal specification 1st material response or ams 4967 federal specification 2nd material response -
Surface Treatment
Paint and lubricant -
Surface Treatment Specification
Nas4006 assn standard 1st treatment response and cetyl alcohol lubricant per mil-l-87132, type 3, grade b military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-007-2578 MPN 209-030-508-49Aircraft Windshield Panel
- 1560-00-175-6640 MPN 206-062-802-73Armor Brace Assembly
- 1560-00-435-4805 MPN 204-030-814-59Door Access Doubler
- 1560-00-442-1723 MPN 212-060-900-183Firewall Bulkhead
- 1560-00-480-7782 MPN 209-050-118-6Cockpit Step
- 1560-00-691-2120 MPN 204-070-107-13Pitot Tube Support Assembly
- 1560-00-735-7525 MPN 209-070-430-11Air D Duct Assembly
- 1560-00-757-2868 MPN 204-031-246-009Aircraft Structural Component Support
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-519-1481 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120-259V4A15 | Bell Helicopter Textron Inc. |
120-259V4A15 | Bell Helicopter Textron Inc. |
NAS5314V4A15 | Bell Helicopter Textron Inc. |