NSN 5305-01-520-9374
High Torque Screw
0.528 inches fastener length, undercut pan no. 2 head style, 0.547 inches head diameter, head height: 0.127 inches .
Manufacturer part number 120-259E3-3 for national stock number 5305015209374.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-520-9374.
-
MPN or Model
120-259E3-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.260 inches -
Fastener Length
0.528 inches -
Head Style
Undercut pan no. 2 -
Head Diameter
0.547 inches -
Head Height
0.127 inches -
Spline Major Diameter
0.155 inches -
Grip Diameter
0.189 inches -
Internal Drive Style
Torx -
End Application
Mv-22 (v-22 lrip 1 e-nsn isil -
Thread Diameter
0.190 inches -
Grip Length
0.125 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3180 pounds per square inch -
Part Name Assigned By Controlling Agency
Screw, shear, pan head, close tolerance, short thread, six lobe recess, 95 ksi fsu -
Material
Iron alloy 660 -
Material Specification
Ams 5731 federal specification 1st material response or ams 5732 federal specification 2nd material response or ams 5737 federal specification 3rd material response or ams 5853 federal specification 4th material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams-qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-538-7413 MPN BACB30LU6-21Close Tolerance Screw
- 5305-01-025-4364 MPN AIC813-08R12Machine Screw
- 5305-01-198-8522 MPN AIC984-3-14Close Tolerance Screw
- 5305-01-304-6736 MPN 720210-7Socket Head Cap Screw
- 5305-01-376-5288 MPN AIC3339C4-6Close Tolerance Screw
- 5305-01-381-2343 MPN AIC818-4-320CSocket Head Cap Screw
- 5305-01-435-6369 MPN BACB30LU9-23Close Tolerance Screw
- 5305-01-435-6397 MPN AIC1515-3-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-520-9374 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120-259E3-3 | Bell Helicopter Textron Inc. |
120-259E3-3 | Arconic Global Fasteners & Rings, |
120-259E3-3 | Sps Technologies, Llc |
120-259E3-3 | Saturn Fasteners Inc |
120-259E3-3 | Heartland Precision Fasteners, Inc. |
120-259E3-3 | B & B Specialties Inc. |
120-259E3-3 | Sps Technologies, Llc |
120-259E3-3 | Sps Technologies, Llc |
120-259E3-3 | B & B Specialties, Inc |
120-259E3-3 | Lfc Industries Inc. |
120-259E3-3 | Sps Technologies, Llc |
NAS5314E3-3 | National Aerospace Standards |