NSN 5305-01-522-5549
High Torque Screw
Between 1.610 inches and 1.640 inches fastener length, flat countersunk head style, 0.350 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number AIC618-4-26 for national stock number 5305015225549.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-522-5549.
-
MPN or Model
AIC618-4-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.393 inches and 0.413 inches -
Fastener Length
Between 1.610 inches and 1.640 inches -
Head Style
Flat countersunk -
Head Diameter
0.350 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F-16 acft -
Thread Diameter
0.250 inches -
Grip Length
1.222 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-455-0416 MPN AIC792-5-13Close Tolerance Screw
- 5305-01-054-6232 MPN AIC9535-6-11Close Tolerance Screw
- 5305-01-158-5371 MPN 3M893-3-9Machine Screw
- 5305-01-174-2708 MPN 51B650-3-5Machine Screw
- 5305-01-322-8717 MPN 720210-90Hexagon Head Cap Screw
- 5305-01-373-4843 MPN ST3M557-9-17Close Tolerance Screw
- 5305-01-481-5175 MPN AIC4040-4-05RClose Tolerance Screw
- 5305-01-562-4972 MPN 120-225C3-06Mate Aircraft Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-522-5549 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC618-4-26 | Sps Technologies, Llc |