NSN 5305-01-530-2406
High Torque Screw
Between 0.699 inches and 0.729 inches fastener length, pan no. 2 head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number 120-259E3-7 for national stock number 5305015302406.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-530-2406.
-
MPN or Model
120-259E3-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.699 inches and 0.729 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Spline Major Diameter
0.155 inches -
Grip Diameter
Between 0.189 inches and 0.190 inches -
Internal Drive Style
Torx -
Thread Diameter
0.190 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3180 pounds per square inch -
Material
Stainless steel -
Material Specification
A286 assn standard single material response -
Surface Treatment
Passivate or cadmium -
Surface Treatment Specification
Ams-qq-p-35 federal specification single treatment response or ams-qq-p-46, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-7669 MPN AIC8C3-3Machine Screw
- 5305-01-054-6252 MPN AIC9535-7-42Close Tolerance Screw
- 5305-01-076-4889 MPN NAS1101-08-26Machine Screw
- 5305-01-081-0132 MPN HT4020-3-6AClose Tolerance Screw
- 5305-01-096-1240 MPN AIC811-3-20Socket Head Cap Screw
- 5305-01-313-9327 MPN GS551C3-554Shoulder Screw
- 5305-01-351-7817 MPN AIC4409-5D19Close Tolerance Screw
- 5305-01-435-6292 MPN BACB30LU9-18Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-530-2406 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120-259E3-7 | Bell Helicopter Textron Inc. |
120-259E3-7 | Sps Technologies, Llc |
120-259E3-7 | Arconic Global Fasteners & Rings, |
120-259E3-7 | Saturn Fasteners Inc |
120-259E3-7 | Heartland Precision Fasteners, Inc. |
120-259E3-7 | B & B Specialties Inc. |
120-259E3-7 | Pilgrim Screw Corporation |
120-259E3-7 | Sps Technologies, Llc |
120-259E3-7 | Sps Technologies, Llc |
120-259E3-7 | B & B Specialties, Inc |
120-259E3-7 | Lfc Industries Inc. |
120-259E3-7 | Sps Technologies, Llc |