NSN 5305-01-532-3056
High Torque Screw
Item is lubricated with cetyl alcohol per mil-l-87132,type iii,grade b.
Manufacturer part number BACS12JB3A5 for national stock number 5305015323056.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-532-3056.
-
MPN or Model
BACS12JB3A5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 4.990 inches and 5.010 inches -
Head Style
Fillister countersunk -
Head Diameter
0.328 inches -
Head Height
0.080 inches -
Grip Diameter
Between 0.010 inches and 0.020 inches -
Internal Drive Style
Torx -
Thread Diameter
0.190 inches -
Grip Length
0.310 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Surface Treatment
Cadmium -
Special Test Features
There is a hole drilled through the threads, diameter of .070 -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-984-6858 MPN AIC1182-103Socket Head Cap Screw
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-188-7465 MPN AIC4038-06-32Machine Screw
- 5305-01-296-1675 MPN AIC618-5-4Machine Screw
- 5305-01-328-9226 MPN AIC1700-3-10Close Tolerance Screw
- 5305-01-417-2492 MPN TX1027V-3-6Close Tolerance Screw
- 5305-01-434-0484 MPN TX1026C4-5AClose Tolerance Screw
- 5305-01-454-0797 MPN LD111-0046-2408Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-532-3056 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACS12JB3A5 | The Boeing Company |
BACS12JB3A5 | Sps Technologies, Llc |
BACS12JB3A5 | Heartland Precision Fasteners, Inc. |
BACS12JB3A5 | Pilgrim Screw Corporation |