NSN 5305-01-599-1954
High Torque Screw
Between 1.1210 inches and 1.1510 inches fastener length, flat countersunk head style, between 0.3859 inches and 0.3948 inches head diameter, head height: 0.060 inches .
Manufacturer part number 3M1170-D4-17A for national stock number 5305015991954.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-599-1954.
-
MPN or Model
3M1170-D4-17A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
Between 1.1210 inches and 1.1510 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.3859 inches and 0.3948 inches -
Head Height
0.060 inches -
Spline Major Diameter
Between 0.154 inches and 0.156 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Torx -
End Application
Ea6b -
Thread Diameter
0.250 inches -
Grip Length
1.1210 mils and 1.1510 centimeters -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
4400 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ph13-8mocres mfr ref 1st material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-012-2012 MPN AIC812-04-12Machine Screw
- 5305-01-050-9003 MPN AIC984-5-14Close Tolerance Screw
- 5305-01-121-3945 MPN AIC202-3E204Screw
- 5305-01-134-9361 MPN SC2671-4-9Machine Screw
- 5305-01-217-4009 MPN AIC4040-3-09RClose Tolerance Screw
- 5305-01-417-2494 MPN TX1026V3-15AClose Tolerance Screw
- 5305-01-425-5120 MPN AIC1700-3-8AClose Tolerance Screw
- 5305-01-462-1652 MPN AIC9535-7-37Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-599-1954 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1170-D4-17A | Boeing Company, The |
TX1027D4-17A | Sps Technologies, Llc |
TX1027D4-17A | Arconic Global Fasteners & Rings, |
TX1027D4-17A | Heartland Precision Fasteners, Inc. |
TX1027D4-17A | Sps Technologies, Llc |
TX1027D4-17A | Sps Technologies, Llc |
TX1027D4-17A | Hi-shear Corporation |
TX1027D4-17A | Sps Technologies, Llc |
TX1027D4-17A | Alcoa Fastening Systems |
TX1027D4-17A | Sps Technologies Inc |