NSN 5305-01-622-6163
High Torque Screw
Item has a hex hole in the end of it that is 0.0791 - 0.0806 inches across the flats and 0.080 inches deep..
Manufacturer part number WC331K5-9 for national stock number 5305016226163.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-622-6163.
-
MPN or Model
WC331K5-9
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.280 inches -
Fastener Length
Between 0.8325 inches and 0.8525 inches -
Head Style
Countersunk cylindrical convex -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Head Major Diameter
Between 0.2532 inches and 0.2605 inches -
Internal Drive Style
W/o internal drive -
Thread Diameter
0.1640 inches -
Grip Length
0.5625 inches -
Features Provided
Cetyl alcohol lubricant -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Material
Titanium alloy -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Bms10-85, type 1, class a mfr ref single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5305-00-522-9628 MPN WC4025-4-10Close Tolerance Screw
- 5305-01-004-9528 MPN WC4027-3-3Close Tolerance Screw
- 5305-01-046-2080 MPN WC4010-6-7Shoulder Screw
- 5305-01-108-2524 MPN 3M938-6D8-7Close Tolerance Screw
- 5320-00-178-8719 MPN HL11VAP-6-6Pin-rivet
- 5320-00-701-9810 MPN BACB30MB6-2Pin-rivet
- 5320-00-959-7291 MPN HL19PB-8-6Pin-rivet
- 5320-01-129-6971 MPN HLT313DL-12-15Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-622-6163 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
WC331K5-9 | West Coast Aerospace Inc |