NSN 5985-00-140-9607
Toggle Attenuator
Transmission line application design, coaxial type body style, 1.51 voltage standing wave ratio, coaxial connector series designation: n.
Manufacturer part number AU25A5NCS for national stock number 5985001409607.
Datasheet
-
Product description
Variable Attenuator NSN 5985-00-140-9607.
-
MPN or Model
AU25A5NCS
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
061700 - Elec Appliances/instruments NOI -
Application Design
Transmission line -
Body Style
Coaxial type -
Overall Length
4.250 inches -
Center To Center Distance Between Mounting Facilities Parallel To Length
Between 1.240 inches and 1.260 inches -
Center To Center Distance Between Mounting Facilities Parallel To Width
Between 1.802 inches and 1.822 inches -
Overall Height
3.800 inches -
Overall Width
Between 0.970 inches and 1.030 inches -
Voltage Standing Wave Ratio
1.51 -
Coaxial Connector Series Designation
N -
Power Rating
4.0 watts average -
Mounting Facility Screw Thread Series Designator
Unc -
Insertion Loss At Minimum Attenuation In Maximum Decibels
0.5 -
Overall Attenuation Range In Decibels
+0.0 to 30.0 -
Attenuation Variation Method
Continuous -
Mounting Facility Type And Quantity
4 threaded hole -
Frequency Range
Between 1.000 gigahertz and 8.000 gigahertz -
Mounting Thread Quantity
32 per inch -
Adjustment Device Type And Quantity
1 slotted screw -
Mounting Facility Pattern
Four position rectangular -
Mounting Facility Screw Thread Diameter
0.138 inches -
Impedance Rating In Ohms
50.0 input-output -
Terminal Type And Quantity
1 connector, coaxial, male and 1 connector, coaxial, female
More from these suppliers
- 5985-01-158-9170 MPN CRM-10-70/23008Directional Coupler
- 5985-01-234-2114 MPN QH-7-17/67668Radio Frequency Power Divider
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-00-140-9607 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AU25A5NCS | Merrimac Industries, Inc. |