NSN 5985-00-155-0436
Toggle Attenuator
Transmission line application design, coaxial type body style, linear scale linearity, scale division quantity: 90.
Manufacturer part number 791FM for national stock number 5985001550436.
Datasheet
-
Product description
Variable Attenuator NSN 5985-00-155-0436.
-
MPN or Model
791FM
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
061700 - Elec Appliances/instruments NOI -
Application Design
Transmission line -
Body Style
Coaxial type -
Overall Length
10.812 inches -
Center To Center Distance Between Mounting Facilities Parallel To Length
8.750 inches -
Center To Center Distance Between Mounting Facilities Parallel To Width
1.000 inches -
Overall Height
6.750 inches -
Overall Width
1.812 inches -
Scale Linearity
Linear -
Scale Division Quantity
90 -
Voltage Standing Wave Ratio
1.30 -
Coaxial Connector Series Designation
N -
Power Rating
10.0 watts average and 5.0 kilowatts peak -
Mounting Facility Screw Thread Series Designator
Unf -
Insertion Loss At Minimum Attenuation In Maximum Decibels
1.5 -
Overall Attenuation Range In Decibels
+0.0 to 37.5 -
Attenuation Variation Method
Continuous -
Vernier Scale Division Quantity
10 -
Mounting Facility Type And Quantity
4 threaded hole -
Frequency Range
Between 2.000 gigahertz and 12.400 gigahertz -
Mounting Thread Quantity
32 per inch -
Adjustment Device Type And Quantity
1 knob -
Mounting Facility Pattern
Four position rectangular -
Mounting Facility Screw Thread Diameter
0.190 inches -
Impedance Rating In Ohms
50.0 input-output -
Terminal Type And Quantity
1 connector, coaxial, male and 1 connector, coaxial, female
More from these suppliers
- 5985-00-022-2892 MPN 755B-6Fixed Attenuator
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-00-155-0436 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
791FM | L-3 Communications Corporation |