NSN 5985-00-287-5067
Toggle Attenuator
Transmission line application design, coaxial type body style, 3.672 inches center to center distance between mounting facilities parallel to height, voltage standing wave ratio: 1.25.
Manufacturer part number 796FM for national stock number 5985002875067.
Datasheet
-
Product description
Variable Attenuator NSN 5985-00-287-5067.
-
MPN or Model
796FM
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
061700 - Elec Appliances/instruments NOI -
Application Design
Transmission line -
Body Style
Coaxial type -
Overall Length
5.609 inches -
Center To Center Distance Between Mounting Facilities Parallel To Width
6.156 inches -
Overall Height
1.750 inches -
Overall Width
8.375 inches -
Center To Center Distance Between Mounting Facilities Parallel To Height
3.672 inches -
Voltage Standing Wave Ratio
1.25 -
Coaxial Connector Series Designation
N -
Power Rating
10.0 watts average and 5.0 kilowatts peak -
Mounting Facility Screw Thread Series Designator
Unc -
Insertion Loss At Minimum Attenuation In Maximum Decibels
1.5 -
Overall Attenuation Range In Decibels
+0.0/+40.0 -
Attenuation Variation Method
Continuous -
Mounting Facility Type And Quantity
4 threaded hole -
Frequency Range
Between 7.000 gigahertz and 11.000 gigahertz -
Overall Attenuation Accuracy In Decibels
-1.50/+1.50 -
Mounting Thread Quantity
32 per inch -
Adjustment Device Type And Quantity
1 knob -
Mounting Facility Pattern
Four position rectangular -
Mounting Facility Screw Thread Diameter
0.138 inches -
Terminal Type And Quantity
1 connector, coaxial, male and 1 connector, coaxial, female
More from these suppliers
- 4920-00-228-3558 MPN 22397M Amplitude Control
- 5985-00-310-4184 MPN 23844Fixed Attenuator
- 5985-00-489-2167 MPN 777C-3Fixed Attenuator
- 5985-01-104-5287 MPN A34U90013-1Directional Coupler
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-00-287-5067 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
796FM | L-3 Communications Corporation |