NSN 5985-00-442-3195
Toggle Attenuator
About this product
Attenuation accuracy measured at 2.0 and 4.0 gigahertz.
Manufacturer part number 138C225H01 for national stock number 5985004423195.
Datasheet
-
Product description
Variable Attenuator NSN 5985-00-442-3195.
-
MPN or Model
138C225H01
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Unit Weight (Est.)
5.3 lb -
Application Design
Transmission line -
Body Style
Coaxial type -
Overall Length
5.780 inches -
Center To Center Distance Between Mounting Facilities Parallel To Length
3.800 inches -
Center To Center Distance Between Mounting Facilities Parallel To Width
3.800 inches -
Overall Height
3.000 inches -
Overall Width
5.000 inches -
Shaft Diameter
0.250 inches -
Shaft Length
0.620 inches -
Operating Tempurature Range
-10.0/+71.0 degrees celsius -
Voltage Standing Wave Ratio
1.50 -
Coaxial Connector Series Designation
N -
Power Rating
5.0 watts average -
Mounting Facility Screw Thread Series Designator
Unc -
Insertion Loss At Minimum Attenuation In Maximum Decibels
6.0 -
Overall Attenuation Range In Decibels
+0.0/+100.0 -
Attenuation Variation Method
Continuous -
Mounting Facility Type And Quantity
4 threaded hole -
Frequency Range
Between 2.000 gigahertz and 4.000 gigahertz -
Overall Attenuation Accuracy In Decibels
-1.50/+1.50 -
Segment Attenuation Range In Decibels
+0.00/+100.00 -
Segment Attenuation Accuracy In Decibels
-1.50/+1.50 -
Mounting Thread Quantity
32 per inch -
Adjustment Device Type And Quantity
1 shaft and 1 knob -
Mounting Facility Pattern
Four position rectangular -
Shaft Type
Round -
Mounting Facility Screw Thread Diameter
0.164 inches -
Impedance Rating In Ohms
50.0 input-output -
Test Data Document
97942-138c225 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) -
Terminal Type And Quantity
2 connector, coaxial, female
More from these suppliers
- 5945-00-044-5788 MPN 577R620H08Electromagnetic Relay
- 5935-00-052-0055 MPN 400R951H01Electrical Connector Backshell
- 5935-00-087-3309 MPN 335C804H03Electrical Receptacle Connector
- 5935-00-312-2294 MPN P7708334REV7PT6Electrical Connector Insert
- 5935-00-425-8097 MPN 117B100H01Tip Plug
- 5935-00-460-0781 MPN 580R400H01Connector Adapter
- 5935-00-557-1736 MPN 582R670H01Electrical Plug Connector
- 5935-00-824-7587 MPN 128C625Electrical Plug Connector
Variable Attenuator
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-00-442-3195 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
138C225H01 | Northrop Grumman Systems Corporation |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.