NSN 5985-00-909-2299
Toggle Attenuator
Transmission line application design, coaxial type body style, -30.0/+70.0 degrees celsius operating tempurature range, voltage standing wave ratio: 1.50.
Manufacturer part number B89-450 for national stock number 5985009092299.
Datasheet
-
Product description
Variable Attenuator NSN 5985-00-909-2299.
-
MPN or Model
B89-450
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
061700 - Elec Appliances/instruments NOI -
Unit Weight (Est.)
2.6 lb -
Application Design
Transmission line -
Body Style
Coaxial type -
Overall Length
8.250 inches -
Overall Height
2.375 inches -
Overall Width
2.938 inches -
Operating Tempurature Range
-30.0/+70.0 degrees celsius -
Voltage Standing Wave Ratio
1.50 -
Coaxial Connector Series Designation
N -
Power Rating
500.0 milliwatts average and 1.0 kilowatts peak -
Insertion Loss At Minimum Attenuation In Maximum Decibels
1.0 -
Overall Attenuation Range In Decibels
+0.0/+20.0 -
Attenuation Variation Method
Stepped -
Step Position Quantity
20 -
Attenuation Per Step In Decibels
1.0 -
Mounting Facility Type And Quantity
2 connector -
Frequency Range
Between 0.000 hertz and 1.630 gigahertz -
Adjustment Device Type And Quantity
1 knob -
Mounting Facility Pattern
Two position in-line -
Impedance Rating In Ohms
50.0 input-output -
Terminal Type And Quantity
1 connector, coaxial, male and 1 connector, coaxial, female
More from these suppliers
- 5985-01-007-9460 MPN 1532T3Radio Frequency Transmission Line Switch
- 5985-01-235-6319 MPN 40-20-12Fixed Attenuator
- 5985-01-392-1352 MPN 45-40-34Fixed Attenuator
- 5985-00-529-0060 MPN 772712-1Electrical Dummy Load
- 5985-01-120-7632 MPN DS0050Radio Frequency Transmission Line Switch
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-00-909-2299 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
B89-450 | Kontron Ag |
B89-450 | Api / Weinschel, Inc. |
974-20 | Api / Weinschel, Inc. |