NSN 5985-01-028-6022
Toggle Attenuator
Transmission line application design, coaxial type body style, -40.0/+85.0 degrees celsius operating tempurature range, voltage standing wave ratio: 1.50.
Manufacturer part number 2666418-1 for national stock number 5985010286022.
Datasheet
-
Product description
Variable Attenuator NSN 5985-01-028-6022.
-
MPN or Model
2666418-1
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
061700 - Elec Appliances/instruments NOI -
Unit Weight (Est.)
1.5 lb -
Application Design
Transmission line -
Body Style
Coaxial type -
Overall Length
4.250 inches -
Overall Height
2.120 inches -
Overall Width
Between 2.180 inches and 2.300 inches -
Operating Tempurature Range
-40.0/+85.0 degrees celsius -
Voltage Standing Wave Ratio
1.50 -
Coaxial Connector Series Designation
N -
Power Rating
4.0 watts average -
Mounting Facility Screw Thread Series Designator
Unc -
Insertion Loss At Minimum Attenuation In Maximum Decibels
0.5 -
Overall Attenuation Range In Decibels
+0.0/+30.0 -
Attenuation Variation Method
Continuous -
Mounting Facility Type And Quantity
7 threaded hole -
Frequency Range
Between 5.000 gigahertz and 8.000 gigahertz -
Mounting Thread Quantity
32 per inch -
Adjustment Device Type And Quantity
1 knob -
Mounting Facility Screw Thread Diameter
0.138 inches -
Impedance Rating In Ohms
50.0 input-output -
Terminal Type And Quantity
2 connector, coaxial, female
More from these suppliers
- 4820-00-003-8640 MPN 2419740Check Valve
- 5930-00-007-9681 MPN 2134929-3Push Button
- 5930-00-157-4233 MPN 417457PC2Electrical Switch Retainer
- 5940-00-171-0156 MPN 17B77482-9216Terminal Board
- 4820-00-185-1157 MPN 2862134Directional Control Linear Valve Sleeve
- 4820-00-210-2393 MPN 1368104PC3Check Valve
- 5935-00-258-4653 MPN 1145399Electrical Receptacle Connector
- 4820-00-334-2108 MPN 297180PC1Valve Body
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-01-028-6022 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2666418-1 | Navair And Navsea Managed |
AU26G2NA1 | Merrimac Industries, Inc. |