NSN 5985-01-041-4905
Toggle Attenuator
Transmission line application design, coaxial type body style, -20.0/+125.0 degrees celsius operating tempurature range, voltage standing wave ratio: 1.15 and 1.00.
Manufacturer part number 75V100W for national stock number 5985010414905.
Datasheet
-
Product description
Variable Attenuator NSN 5985-01-041-4905.
-
MPN or Model
75V100W
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
Application Design
Transmission line -
Body Style
Coaxial type -
Overall Length
3.810 inches -
Overall Height
2.200 inches -
Overall Width
1.880 inches -
Shaft Diameter
0.250 inches -
Shaft Length
0.750 inches -
Operating Tempurature Range
-20.0/+125.0 degrees celsius -
Voltage Standing Wave Ratio
1.15 and 1.00 -
Coaxial Connector Series Designation
Sma -
Power Rating
0.5 watts average -
Insertion Loss At Minimum Attenuation In Maximum Decibels
0.1 -
Overall Attenuation Range In Decibels
+0.0/+100.0 -
Attenuation Variation Method
Stepped -
Step Position Quantity
10 -
Attenuation Per Step In Decibels
10.0 -
Frequency Range
Between 25.000 megahertz and 35.000 megahertz -
Overall Attenuation Accuracy In Decibels
-0.20/+0.20 -
Adjustment Device Type And Quantity
1 shaft -
Shaft Type
Round -
Terminal Type And Quantity
2 connector, coaxial, female
More from these suppliers
- 5985-00-957-1860 MPN 50 CV 120-726Variable Attenuator
- 5935-00-111-8430 MPN 580R555H01Electrical Connector Cover
- 5950-00-133-8943 MPN 788C983H05Radio Frequency Coil
- 5940-00-159-0243 MPN 1JA2597-19Stud Terminal
- 1560-00-360-2300 MPN 417R900H01Antenna Arm Clamp
- 5985-00-443-9473 MPN 128C842H01Radio Frequency Reflection Isolator
- 5985-00-470-2899 MPN 128C539H08Fixed Attenuator
- 5930-00-583-2288 MPN 331C212H01Rotary Switch
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-01-041-4905 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
75V100W | Alan Industries Inc |
142C714H01 | Northrop Grumman Systems Corporation |