NSN 5985-01-092-9270
Toggle Attenuator
Transmission line application design, aluminum alloy body material, irregular body style, operating tempurature range: -55.0/+85.0 degrees celsius.
Manufacturer part number 0172-3-1218-006 for national stock number 5985010929270.
Datasheet
-
Product description
Variable Attenuator NSN 5985-01-092-9270.
-
MPN or Model
0172-3-1218-006
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
061700 - Elec Appliances/instruments NOI -
Unit Weight (Est.)
0.1 lb -
Application Design
Transmission line -
Body Material
Aluminum alloy -
Body Style
Irregular -
Overall Length
2.000 inches -
Center To Center Distance Between Mounting Facilities Parallel To Length
1.820 inches -
Center To Center Distance Between Mounting Facilities Parallel To Width
0.950 inches -
Overall Height
0.750 inches -
Overall Width
2.000 inches -
Unthreaded Mounting Hole Diameter
Between 0.122 inches and 0.128 inches -
Operating Tempurature Range
-55.0/+85.0 degrees celsius -
Voltage Standing Wave Ratio
2.00 -
Coaxial Connector Series Designation
Sma -
Insertion Loss At Minimum Attenuation In Maximum Decibels
3.5 -
Overall Attenuation Range In Decibels
+0.0/+40.0 -
Attenuation Variation Method
Continuous -
Mounting Facility Type And Quantity
4 unthreaded hole -
Frequency Range
Between 12.400 gigahertz and 18.200 gigahertz -
Overall Attenuation Accuracy In Decibels
-0.50/+0.50 -
Adjustment Device Type And Quantity
1 electronic, voltage controlled -
Mounting Facility Pattern
Four position rectangular -
Terminal Type And Quantity
3 connector, coaxial, female and 3 pin -
Fsc Application Data
Antennas, waveguides, and related equipment
More from these suppliers
- 5930-00-922-1621 MPN 2915Push Switch
- 5950-01-069-8757 MPN 0603-1-1410Radio Frequency Transformer
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-01-092-9270 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
0172-3-1218-006 | Usacecom Intelligence Electronic |
1529-6 | General Microwave Corporation |