NSN 5985-01-092-9292
Toggle Attenuator
Terminals marked w/symbols j1,j2,j3,dc + and dc -; op alt 0 to 30000 ft; gray 36231 per fed-std-595; fungus inert materials.
Manufacturer part number 1529-2 for national stock number 5985010929292.
Datasheet
-
Product description
Variable Attenuator NSN 5985-01-092-9292.
-
MPN or Model
1529-2
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
061700 - Elec Appliances/instruments NOI -
Unit Weight (Est.)
0.3 lb -
Application Design
Transmission line -
Body Material
Aluminum -
Body Style
Irregular -
Overall Length
2.000 inches -
Center To Center Distance Between Mounting Facilities Parallel To Length
1.820 inches -
Center To Center Distance Between Mounting Facilities Parallel To Width
0.950 inches -
Overall Height
0.750 inches -
Unthreaded Mounting Hole Diameter
Between 0.122 inches and 0.128 inches -
Operating Tempurature Range
-55.0/+85.0 degrees celsius -
Voltage Standing Wave Ratio
2.00 -
Coaxial Connector Series Designation
Sma -
Insertion Loss At Minimum Attenuation In Maximum Decibels
2.0 -
Overall Attenuation Range In Decibels
+0.0/+10.0 -
Attenuation Variation Method
Continuous -
Mounting Facility Type And Quantity
4 unthreaded hole -
Frequency Range
Between 1.000 gigahertz and 2.200 gigahertz -
Overall Attenuation Accuracy In Decibels
-0.50/+0.50 -
Adjustment Device Type And Quantity
1 electronic, voltage controlled -
Mounting Facility Pattern
Four position rectangular -
Terminal Type And Quantity
3 connector, coaxial, female and 3 pin -
Fsc Application Data
Antennas, waveguides, and related equip.
More from these suppliers
- 5905-00-563-0647 MPN 4465-G402Thermal Resistor
- 6145-01-100-0732 MPN 8397-P1Electrical Special Purpose Cable
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
![Mechanic Bill explains Toggle Attenuator](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5985-01-092-9292 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1529-2 | General Microwave Corporation |
0172-3-1218-002 | Usacecom Intelligence Electronic |
Stock Check
![](/public/images/partscage_shelf3.png)