NSN 5985-01-113-3037
Toggle Attenuator
Transmission line application design, coaxial type body style, +0.0/+65.0 degrees celsius operating tempurature range, voltage standing wave ratio: 1.30.
Manufacturer part number ARS-1/13756 for national stock number 5985011133037.
Datasheet
-
Product description
Variable Attenuator NSN 5985-01-113-3037.
-
MPN or Model
ARS-1/13756
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
061700 - Elec Appliances/instruments NOI -
Unit Weight (Est.)
0.1 lb -
Application Design
Transmission line -
Body Style
Coaxial type -
Overall Length
0.600 inches -
Overall Height
0.750 inches -
Overall Width
1.350 inches -
Shaft Diameter
0.125 inches -
Shaft Length
0.600 inches -
Operating Tempurature Range
+0.0/+65.0 degrees celsius -
Voltage Standing Wave Ratio
1.30 -
Power Rating
0.5 watts average -
Insertion Loss At Minimum Attenuation In Maximum Decibels
1.5 -
Overall Attenuation Range In Decibels
+0.0/+20.0 -
Attenuation Variation Method
Continuous -
Mounting Facility Type And Quantity
1 threaded stud -
Frequency Range
Between 0.000 hertz and 225.000 megahertz -
Adjustment Device Type And Quantity
1 slotted screw and 1 shaft -
Shaft Type
Round, slotted -
Impedance Rating In Ohms
50.0 input-output -
Terminal Type And Quantity
4 pin
More from these suppliers
- 5950-00-268-3262 MPN 7485524P1Reactor
- 5940-00-387-1993 MPN P-7763716G-1Radio Frequency Cable Adapter
- 5935-00-529-0319 MPN 725016A1158-001Electrical Receptacle Connector Body
- 5940-00-764-1028 MPN 7129842P4Stud Terminal
- 5950-00-938-6377 MPN 77C707980-1Audio Frequency Transformer
- 5985-01-115-2053 MPN 77C716235P001Radio Frequency Transmission Line Switch
- 5950-01-155-1286 MPN 77C717586P2Reactor
- 5930-01-116-1814 MPN 7847340P002Thermostatic Switch
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-01-113-3037 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ARS-1/13756 | Merrimac Industries, Inc. |
77C712498P001 | Lockheed Martin Corporation |