NSN 5985-01-127-1920
Toggle Attenuator
Transmission line application design, coaxial type body style, 1.20 and 1.50 voltage standing wave ratio, coaxial connector series designation: bnc.
Manufacturer part number 5070 for national stock number 5985011271920.
Datasheet
-
Product description
Variable Attenuator NSN 5985-01-127-1920.
-
MPN or Model
5070
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
061700 - Elec Appliances/instruments NOI -
Unit Weight (Est.)
0.5 lb -
Application Design
Transmission line -
Body Style
Coaxial type -
Overall Length
3.500 inches -
Center To Center Distance Between Mounting Facilities Parallel To Length
1.547 inches -
Center To Center Distance Between Mounting Facilities Parallel To Width
1.547 inches -
Overall Height
1.875 inches -
Overall Width
2.437 inches -
Voltage Standing Wave Ratio
1.20 and 1.50 -
Coaxial Connector Series Designation
Bnc -
Power Rating
500.0 milliwatts peak -
Mounting Facility Screw Thread Series Designator
Unc -
Insertion Loss At Minimum Attenuation In Maximum Decibels
0.4 -
Overall Attenuation Range In Decibels
+0.0/+70.0 -
Attenuation Accuracy Reference Frequency
2.0 gigahertz -
Attenuation Variation Method
Stepped -
Step Position Quantity
7 -
Attenuation Per Step In Decibels
10.0 -
Mounting Facility Type And Quantity
4 threaded hole -
Frequency Range
Between 0.000 hertz and 2.000 gigahertz -
Overall Attenuation Accuracy In Decibels
-3.00/+3.00 -
Mounting Thread Quantity
32 per inch -
Adjustment Device Type And Quantity
1 knob -
Mounting Facility Pattern
Four position rectangular -
Mounting Facility Screw Thread Diameter
0.164 inches -
Impedance Rating In Ohms
50.0 input-output -
Terminal Type And Quantity
2 connector, coaxial, female
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-01-127-1920 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
5070 | Wavetek Rf Products Inc |