NSN 5985-01-150-6323
Toggle Attenuator
Transmission line application design, irregular body style, 1.25 and 1.35 and 1.50 voltage standing wave ratio, coaxial connector series designation: sma.
Manufacturer part number 100C0912 for national stock number 5985011506323.
Datasheet
-
Product description
Variable Attenuator NSN 5985-01-150-6323.
-
MPN or Model
100C0912
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
061700 - Elec Appliances/instruments NOI -
Unit Weight (Est.)
0.3 lb -
Application Design
Transmission line -
Body Style
Irregular -
Overall Length
2.000 inches -
Center To Center Distance Between Mounting Facilities Parallel To Length
1.836 inches -
Center To Center Distance Between Mounting Facilities Parallel To Width
1.336 inches -
Overall Height
0.750 inches -
Overall Width
1.900 inches -
Unthreaded Mounting Hole Diameter
0.093 inches -
Voltage Standing Wave Ratio
1.25 and 1.35 and 1.50 -
Coaxial Connector Series Designation
Sma -
Insertion Loss At Minimum Attenuation In Maximum Decibels
3.0 -
Overall Attenuation Range In Decibels
+0.0/+38.0 -
Attenuation Variation Method
Continuous -
Mounting Facility Type And Quantity
4 unthreaded hole -
Frequency Range
Between 20.000 megahertz and 500.000 megahertz -
Adjustment Device Type And Quantity
1 electronic, voltage controlled -
Mounting Facility Pattern
Four position rectangular -
Impedance Rating In Ohms
50.0 input-output -
Terminal Type And Quantity
2 connector, coaxial, female and 4 solder stud
More from these suppliers
- 5985-01-343-3653 MPN DA0309-1Variable Attenuator
- 5985-01-565-5983 MPN CHD09104-1Radio Frequency Transmission Line Switch
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-01-150-6323 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
100C0912 | Daico Industries, Inc. |