NSN 5985-01-158-0056
Toggle Attenuator
Transmission line application design, coaxial type body style, 0.844 inches center to center distance between mounting facilities parallel to height, voltage standing wave ratio: 1.50.
Manufacturer part number M24215/9-001 for national stock number 5985011580056.
Datasheet
-
Product description
Variable Attenuator NSN 5985-01-158-0056.
-
MPN or Model
M24215/9-001
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
061700 - Elec Appliances/instruments NOI -
Unit Weight (Est.)
0.4 lb -
Application Design
Transmission line -
Body Style
Coaxial type -
Overall Length
2.510 inches -
Center To Center Distance Between Mounting Facilities Parallel To Length
0.656 inches -
Overall Height
2.500 inches -
Overall Width
1.000 inches -
Unthreaded Mounting Hole Diameter
0.104 inches -
Center To Center Distance Between Mounting Facilities Parallel To Height
0.844 inches -
End Application
An/trc-170 -
Voltage Standing Wave Ratio
1.50 -
Coaxial Connector Series Designation
Sma -
Power Rating
2.0 watts average -
Insertion Loss At Minimum Attenuation In Maximum Decibels
0.5 -
Overall Attenuation Range In Decibels
+0.0/+20.0 -
Attenuation Variation Method
Continuous -
Mounting Facility Type And Quantity
4 unthreaded hole -
Frequency Range
Between 2.000 gigahertz and 8.000 gigahertz -
Adjustment Device Type And Quantity
1 knob w/dial -
Mounting Facility Pattern
Four position rectangular -
Impedance Rating In Ohms
50.0 input-output -
Test Data Document
81349-mil-a-24215 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Terminal Type And Quantity
2 connector, coaxial, female -
Specification Data
81349-mil-a-24215/9 government specification
More from these suppliers
- 5905-00-003-7708 MPN MILR94-3Nonprecision Nonwire Wound Variable Resistor
- 5905-00-004-7650 MPN RNC60H1500FMFilm Fixed Resistor
- 5905-00-004-7683 MPN MILR55182-7Film Fixed Resistor
- 5905-00-005-2664 MPN RBR71L42201BRNoninductive Wire Wound Fixed Resistor
- 5935-00-005-2818 MPN M83723/24R1810NElectrical Plug Connector
- 5905-00-006-9092 MPN RNR65E5623FSNoninductive Wire Wound Fixed Resistor
- 5905-00-009-1142 MPN RER60F2491MInductive Wire Wound Fixed Resistor
- 5905-00-009-1155 MPN MIL-R-39009/1Inductive Wire Wound Fixed Resistor
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-01-158-0056 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
M24215/9-001 | Military Specifications |
MIL-DTL-24215/9 | Military Specifications |
MIL-DTL-24215/9 | Military Specifications |
M24215/9-001 | Military Specifications |
MIL-DTL-24215/9 | Military Specifications |
M24215/9-001 | Military Specifications |
MIL-DTL-24215/9 | Military Specifications |
MIL-DTL-24215/9 | Military Specifications |
M24215/9-001 | Military Specifications |
M24215/9-001 | Military Specifications |
MIL-DTL-24215/9 | Military Specifications |
M24215/9-001 | Military Specifications |
MIL-DTL-24215/9 | Military Specifications |