NSN 5985-01-187-0799
Toggle Attenuator
Transmission line application design, 3.500 inches center to center distance between mounting facilities parallel to height, 1.50 and 1.60 voltage standing wave ratio, coaxial connector series designation: wpm.
Manufacturer part number 940-114-6 for national stock number 5985011870799.
Datasheet
-
Product description
Variable Attenuator NSN 5985-01-187-0799.
-
MPN or Model
940-114-6
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
Application Design
Transmission line -
Center To Center Distance Between Mounting Facilities Parallel To Width
3.500 inches -
Overall Height
4.520 inches -
Overall Width
4.520 inches -
Unthreaded Mounting Hole Diameter
0.154 inches -
Center To Center Distance Between Mounting Facilities Parallel To Height
3.500 inches -
Voltage Standing Wave Ratio
1.50 and 1.60 -
Coaxial Connector Series Designation
Wpm -
Power Rating
5.0 watts average and 500.0 watts peak -
Insertion Loss At Minimum Attenuation In Maximum Decibels
6.0 -
Overall Attenuation Range In Decibels
+0.0/+114.0 -
Attenuation Accuracy Reference Frequency
1.0 gigahertz -
Attenuation Variation Method
Continuous -
Mounting Facility Type And Quantity
4 unthreaded hole -
Frequency Range
Between 0.000 hertz and 2.000 gigahertz -
Overall Attenuation Accuracy In Decibels
-0.25/+0.25 -
Adjustment Device Type And Quantity
1 knob w/dial -
Mounting Facility Pattern
Four position rectangular -
Impedance Rating In Ohms
50.0 input-output -
Terminal Type And Quantity
2 connector, coaxial, female
More from these suppliers
- 5985-01-078-3681 MPN 001-83Radio Frequency Circulator
- 5985-01-217-1724 MPN 1041523-29Fixed Attenuator
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-01-187-0799 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
940-114-6 | Api / Weinschel, Inc. |