NSN 5985-01-325-9241
Toggle Attenuator
Transmission line application design, coaxial type body style, 1.20 and 1.50 voltage standing wave ratio, coaxial connector series designation: bnc.
Manufacturer part number 5010A for national stock number 5985013259241.
Datasheet
-
Product description
Variable Attenuator NSN 5985-01-325-9241.
-
MPN or Model
5010A
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
061700 - Elec Appliances/instruments NOI -
Unit Weight (Est.)
1 lb -
Application Design
Transmission line -
Body Style
Coaxial type -
Overall Length
2.875 inches -
Overall Height
2.438 inches -
Overall Width
1.875 inches -
Shaft Diameter
0.313 inches -
Shaft Length
0.750 inches -
Voltage Standing Wave Ratio
1.20 and 1.50 -
Coaxial Connector Series Designation
Bnc -
Power Rating
1.0 watts average -
Mounting Facility Screw Thread Series Designator
Unc -
Insertion Loss At Minimum Attenuation In Maximum Decibels
0.3 -
Overall Attenuation Range In Decibels
+0.0/+10.0 -
Attenuation Variation Method
Stepped -
Step Position Quantity
10 -
Attenuation Per Step In Decibels
1.0 -
Mounting Facility Type And Quantity
6 threaded hole -
Frequency Range
Between 0.000 hertz and 2000.000 megahertz -
Overall Attenuation Accuracy In Decibels
-1.00/+1.00 -
Segment Attenuation Range In Decibels
+0.00/+1.00 and +1.00/+2.00 and +2.00/+3.00 and +3.00/+4.00 and +4.00/+5.00 and +5.00/+6.00 and +6.00/+7.00 and +7.00/+8.00 and +8.00/+9.00 and +9.00/+10.00 -
Mounting Thread Quantity
32 per inch -
Adjustment Device Type And Quantity
1 shaft -
Shaft Type
Round -
Mounting Facility Screw Thread Diameter
0.138 inches -
Impedance Rating In Ohms
50.0 input-output -
Terminal Type And Quantity
2 connector, coaxial, female
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-01-325-9241 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
5010A | Wavetek Rf Products Inc |