NSN 5985-01-356-8597
Toggle Attenuator
Transmission line application design, coaxial type body style, 1.20 voltage standing wave ratio, coaxial connector series designation: sma.
Manufacturer part number 117191 for national stock number 5985013568597.
Datasheet
-
Product description
Variable Attenuator NSN 5985-01-356-8597.
-
MPN or Model
117191
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
061700 - Elec Appliances/instruments NOI -
Application Design
Transmission line -
Body Style
Coaxial type -
Overall Length
3.900 inches -
Center To Center Distance Between Mounting Facilities Parallel To Length
3.000 inches -
Center To Center Distance Between Mounting Facilities Parallel To Width
1.000 inches -
Overall Height
1.260 inches -
Overall Width
1.460 inches -
Unthreaded Mounting Hole Diameter
0.125 inches -
End Application
6625-01-244-3469 calibrator frequency -
Voltage Standing Wave Ratio
1.20 -
Coaxial Connector Series Designation
Sma -
Power Rating
100.0 milliwatts average -
Insertion Loss At Minimum Attenuation In Maximum Decibels
1.5 -
Overall Attenuation Range In Decibels
+0.0/+63.0 -
Attenuation Variation Method
Stepped -
Step Position Quantity
6 -
Attenuation Per Step In Decibels
1.0 and 2.0 and 4.0 and 8.0 and 16.0 and 32.0 -
Mounting Facility Type And Quantity
4 unthreaded hole -
Frequency Range
Between 0.000 hertz and 500.000 megahertz -
Overall Attenuation Accuracy In Decibels
-0.60/+0.60 -
Adjustment Device Type And Quantity
1 electronic, programmable -
Mounting Facility Pattern
Four position rectangular -
Impedance Rating In Ohms
50.0 input-output -
Terminal Type And Quantity
2 connector, coaxial, female and 7 pin and 1 turret
More from these suppliers
- 5985-00-097-3932 MPN 2000-11585-1Antenna Assembly
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-01-356-8597 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
117191 | Boeing Company, The |
004-338-00 | Trilithic, Inc. |