NSN 5985-01-449-5407
Toggle Attenuator
Transmission line application design, coaxial type body style, 1.75 voltage standing wave ratio, coaxial connector series designation: sma.
Manufacturer part number C20665-1 for national stock number 5985014495407.
Datasheet
-
Product description
Variable Attenuator NSN 5985-01-449-5407.
-
MPN or Model
C20665-1
-
Schedule B
8529.10.9000 (Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi) -
NMF (National Motor Freight)
061700 - Elec Appliances/instruments NOI -
Application Design
Transmission line -
Body Style
Coaxial type -
Overall Length
2.500 inches -
Overall Height
2.500 inches -
Overall Width
1.000 inches -
Unthreaded Mounting Hole Diameter
0.125 inches -
Voltage Standing Wave Ratio
1.75 -
Coaxial Connector Series Designation
Sma -
Power Rating
100.0 milliwatts average and 60.0 watts peak -
Insertion Loss At Minimum Attenuation In Maximum Decibels
3.1 -
Overall Attenuation Range In Decibels
+0.0/+32.0 -
Attenuation Variation Method
Continuous -
Mounting Facility Type And Quantity
4 unthreaded hole -
Frequency Range
Between 1.000 gigahertz and 4.000 gigahertz -
Adjustment Device Type And Quantity
1 electronic, voltage controlled -
Impedance Rating In Ohms
50.0 input-output -
Terminal Type And Quantity
1 connector, receptacle and 2 connector, coaxial, female
More from these suppliers
- 5985-00-151-4538 MPN A373DSFixed Attenuator
- 5905-01-013-3638 MPN PME55S-9090OHMSPORM0.5PCTFilm Fixed Resistor
- 5905-01-064-9062 MPN PME55 22.50OHM 0.25PEFilm Fixed Resistor
- 5985-01-357-6801 MPN A663ASFixed Attenuator
- 1560-00-162-2261 MPN 12W8861-36Airfoil Rib
- 1560-00-205-8412 MPN 540P1022-1Tailpipe Mounting Assembly
- 1560-00-401-1104 MPN 12H1236-802Piping Support Assembly
- 4920-00-451-1858 MPN 12A11619-1Interface Device Adapter Assembly
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
Pricing and Availability
Get a quote for 5985-01-449-5407 variable attenuatorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C20665-1 | Lockheed Martin Corporation |
GA-22-TR | Aeroflex Control Components, Inc. |
C20665 | Lockheed Martin Corporation |