NSN 5306-00-001-4847
Coaxial Connector
1.690 inches fastener length, double hexagon w/hole head style, 0.265 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number MS21250-03020 for national stock number 5306000014847.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-001-4847.
-
MPN or Model
MS21250-03020
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.430 inches and 0.450 inches -
Fastener Length
1.690 inches -
Head Style
Double hexagon w/hole -
Head Height
0.265 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
Between 0.340 inches and 0.350 inches -
Extended Washer Thickness
0.055 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-01-054-2530 MPN BACB30LU4-9Close Tolerance Screw
- 5305-01-435-6482 MPN BACB30LU9-24Close Tolerance Screw
- 5305-01-478-0773 MPN ST3M652C6-10AScrew Close Toleran
- 5306-00-512-6423 MPN VEP220555-5-14Special Bolt
- 5306-01-027-3007 MPN VEH160271-3M11Close Tolerance Bolt
- 5306-01-142-2898 MPN ST3M507-8D39Shoulder Bolt
- 5306-01-186-8583 MPN VG0001-3D22Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-001-4847 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-03020 | National Aerospace Standards |
VFK100G-03020 | Valley-todeco, Inc. |
MS21250-03020 | Military Standards |
Stock Check
- NS: 26
- NE: 1757