NSN 5306-00-003-0644
Close Tolerance Hex Head Bolt
Detent ring in shank.
Manufacturer part number CIPRD-MS27576-5-26R for national stock number 5306000030644.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-003-0644.
-
MPN or Model
CIPRD-MS27576-5-26R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.311 inches and 0.378 inches -
Fastener Length
Between 2.103 inches and 2.123 inches -
Head Style
Dished hexagon -
Head Height
Between 0.157 inches and 0.172 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 1.625 inches and 1.641 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.988 inches first hole and 2.018 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-532-9137 MPN 03292-05Hexagon Head Cap Screw
- 5305-01-601-3838 MPN 03359-08Socket Head Cap Screw
- 5306-01-382-9981 MPN 02313-5Machine Bolt
- 5306-01-383-0004 MPN 02313-4Machine Bolt
- 1680-01-535-6802 MPN CA17247-6-7-3 Two Lug Receptacle
- 5305-01-549-6392 MPN CA21063-08-4-12Close Tolerance Screw
- 5306-01-120-4338 MPN SS27576-4-26Machine Bolt
- 4920-01-571-0093 MPN NAS1213R20K3 Strap Assembly-tie
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-003-0644 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CIPRD-MS27576-5-26R | Defense Logistics Agency |
MS27576-5-26 | Military Standards |
CA4510-5-26 | Arconic Global Fasteners & Rings, |
AS194-5-26 | Avibank Mfg., Inc. |
106467-5-26 | Sps Technologies, Llc |
MS27576-5-26 | National Aerospace Standards |