NSN 5306-00-003-4109
Close Tolerance Hex Head Bolt
W/retaining element on shank.
Manufacturer part number 106467-5-28 for national stock number 5306000034109.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-003-4109.
-
MPN or Model
106467-5-28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.311 inches and 0.378 inches -
Fastener Length
Between 2.228 inches and 2.248 inches -
Head Style
Dished hexagon -
Head Height
Between 0.157 inches and 0.172 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 1.750 inches and 1.766 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.113 inches first hole and 2.143 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel -
Material Specification
Mil-b-83050 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-535-6802 MPN CA17247-6-7-3 Two Lug Receptacle
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-00-943-1999 MPN CA28080-08-6SScrew Assembly
- 5305-01-429-2408 MPN CA28181-04Panel Screw Assembly
- 5306-01-056-6522 MPN CA21037-4-4HSInternal Wrenching Bolt
- 5306-01-120-4338 MPN SS27576-4-26Machine Bolt
- 5306-01-646-1560 MPN CA21392-4-2Internal Wrenching Bolt
- 1560-00-010-9081 MPN 65303-03029-041Duct Mid-section Assembly
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-003-4109 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106467-5-28 | Sps Technologies, Llc |
AC194-5-28 | Avibank Mfg., Inc. |
MS27576-5-28 | National Aerospace Standards |
SS27576-5-28 | Sikorsky Aircraft Corporation |
MS27576-5-28 | Military Standards |
CA4510-5-28 | Arconic Global Fasteners & Rings, |