NSN 5306-00-003-4156
Close Tolerance Hex Head Bolt
W/retaining element on shank.
Manufacturer part number CIPRD-MS27576-5-21R for national stock number 5306000034156.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-003-4156.
-
MPN or Model
CIPRD-MS27576-5-21R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.311 inches and 0.378 inches -
Fastener Length
Between 1.790 inches and 1.810 inches -
Head Style
Dished hexagon -
Head Height
Between 0.157 inches and 0.172 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 1.312 inches and 1.328 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.605 inches first hole and 1.705 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel -
Material Specification
Mil-b-83050 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-222-0823 MPN P00415NRPMachine Screw
- 5305-01-308-8192 MPN LL-HX6-3306Setscrew
- 5305-01-325-1500 MPN PO0046NRPMachine Screw
- 5306-01-382-9985 MPN 02314-3Machine Bolt
- 1560-01-087-5064 MPN 43623-13Handle Assembly
- 5305-00-606-9527 MPN CA2652-06-65Close Tolerance Screw
- 5305-00-615-1634 MPN CA29040-04-4-9PPanel Screw Assembly
- 5305-01-047-3094 MPN CA28080-4-8SPanel Screw Assembly
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-003-4156 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CIPRD-MS27576-5-21R | Defense Logistics Agency |
MS27576-5-21 | Military Standards |
CA4510-5-21 | Arconic Global Fasteners & Rings, |
AS194-5-21 | Avibank Mfg., Inc. |
106467-5-21 | Sps Technologies, Llc |
MS27576-5-21 | National Aerospace Standards |