NSN 5306-00-005-0546
Close Tolerance Hex Head Bolt
Between 2.665 inches and 2.685 inches fastener length, dished hexagon head style, between 0.157 inches and 0.172 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number MS27576-5-35R for national stock number 5306000050546.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-005-0546.
-
MPN or Model
MS27576-5-35R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.310 inches and 0.377 inches -
Fastener Length
Between 2.665 inches and 2.685 inches -
Head Style
Dished hexagon -
Head Height
Between 0.157 inches and 0.172 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 2.188 inches and 2.204 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
7510 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.209 inches first hole and 2.303 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5306-00-143-3351 MPN 9610M82P03Shear Bolt
- 5306-01-102-2673 MPN SS27576-5-45Machine Bolt
- 5305-01-386-5277 MPN 02270-2Shoulder Screw
- 5305-01-094-6060 MPN CA2658-4-97Close Tolerance Screw
- 5305-01-303-2736 MPN CA2915-4-12HSSocket Head Cap Screw
- 5305-01-466-6883 MPN CA22000C10-10-18Hexag Captive Screw
- 5940-01-135-7077 MPN NAS1744-7Conductor Splice
- 5940-01-361-8073 MPN NAS1746-6Conductor Splice
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-005-0546 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27576-5-35R | M.s. Aerospace Inc. |
CIPRD-MS27576-5-35R | Defense Logistics Agency |
MS27576-5-35 | Military Standards |
CA4510-5-35 | Arconic Global Fasteners & Rings, |
AS194-5-35 | Avibank Mfg., Inc. |
106467-5-35 | Sps Technologies, Llc |
MS27576-5-35 | National Aerospace Standards |