NSN 5306-00-005-0547
Close Tolerance Hex Head Bolt
W/retaining element on shank.
Manufacturer part number 106467-6-34 for national stock number 5306000050547.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-005-0547.
-
MPN or Model
106467-6-34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.357 inches and 0.439 inches -
Fastener Length
Between 2.664 inches and 2.684 inches -
Head Style
Dished hexagon -
Head Height
Between 0.189 inches and 0.204 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 2.125 inches and 2.141 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.549 inches first hole and 2.579 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-073-2582 MPN 01966Neat And Vent Duct
- 5305-00-229-3662 MPN 01981Shoulder Screw
- 5305-01-198-2347 MPN 225389Machine Screw
- 5305-01-386-5277 MPN 02270-2Shoulder Screw
- 5306-01-265-4796 MPN QAP-EQ003Shear Bolt
- 1560-01-139-5549 MPN TL12079-103Avionics Access D Latch Assembly
- 5305-00-279-4410 MPN 28080-4-20SPanel Screw Assembly
- 5305-00-943-1999 MPN CA2848-6SScrew Assembly
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-005-0547 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106467-6-34 | Sps Technologies, Llc |
AS194-6-34 | Avibank Mfg., Inc. |
CIPRD-MS27576-6-34R | Defense Logistics Agency |
MS27576-6-34 | National Aerospace Standards |
MS27576-6-34 | Military Standards |
CA4510-6-34 | Arconic Global Fasteners & Rings, |