NSN 5306-00-005-0549
Close Tolerance Hex Head Bolt
W/retaining element on shank.
Manufacturer part number 106467-6-19 for national stock number 5306000050549.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-005-0549.
-
MPN or Model
106467-6-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.356 inches and 0.438 inches -
Fastener Length
Between 1.726 inches and 1.746 inches -
Head Style
Dished hexagon -
Head Height
Between 0.189 inches and 0.204 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 1.188 inches and 1.204 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.611 inches first hole and 1.641 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel -
Material Specification
Mil-b-83050 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-151-7989 MPN CA2630-0511Close Tolerance Screw
- 5305-01-240-8917 MPN CA29030-2-4HSPanel Screw Assembly
- 5305-01-507-1083 MPN CA2292-10-16-14Panel Screw Assembly
- 5305-01-512-8323 MPN CA22033-4-10-12Close Tolerance Screw
- 5306-01-488-3751 MPN CA21358-6-12RSMachine Bolt
- 5306-01-537-4638 MPN CA22027-5-24-19Internal Wrenching Bolt
- 5975-00-671-5938 MPN NAS622CEBHook
- 5940-01-425-6507 MPN NAS1063A5-441Terminal Board Marker Strip
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-005-0549 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106467-6-19 | Sps Technologies, Llc |
AS194-6-19 | Avibank Mfg., Inc. |
MS27576-6-19 | National Aerospace Standards |
MS27576-6-19 | Military Standards |
CA4510-6-19 | Arconic Global Fasteners & Rings, |
Stock Check
- NE: 709
- NS: 30