NSN 5306-00-006-8207
Coaxial Connector
1.437 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number 128BM11160-11 for national stock number 5306000068207.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-006-8207.
-
MPN or Model
128BM11160-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.365 inches and 0.385 inches -
Fastener Length
1.437 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.075 inches first hole and 0.080 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
185000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.318 inches first hole -
Material
Steel -
Material Specification
Nas 1597, cond f assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-001-1730 MPN 123BP50005-1Thermal Radi Shield
- 4920-00-009-7601 MPN GH15A7Connector Cover Panel
- 4920-00-109-6582 MPN 128SEAV12025-3Fire Control System Test Set
- 5905-00-113-2418 MPN GR815BD50R0BInductive Wire Wound Fixed Resistor
- 1560-00-148-8798 MPN A51B20213-7Aircraft Fairing
- 1560-00-152-2748 MPN 1128B40385-7Aircraft Skin
- 5935-00-168-9174 MPN GC800JD-B2207PElectrical Plug Connector
- 1560-00-193-4964 MPN 95501-1Aircraft Access Cover
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-006-8207 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
128BM11160-11 | Northrop Grumman Systems Corporation |
128BM11160-11 | Northrop Grumman Systems Corporation |