NSN 5306-00-007-0463
Coaxial Connector
Between 2.845 inches and 2.875 inches fastener length, double hexagon w/hole head style, between 0.290 inches and 0.310 inches head height, width between flats: between 0.306 inches and 0.315 inches .
Manufacturer part number 7128010-01 for national stock number 5306000070463.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-007-0463.
-
MPN or Model
7128010-01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.389 inches and 0.510 inches -
Fastener Length
Between 2.845 inches and 2.875 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.290 inches and 0.310 inches -
Width Between Flats
Between 0.306 inches and 0.315 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
Between 0.059 inches and 0.079 inches -
Hole Diameter
0.046 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.057 inches first hole and 0.067 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 2.365 inches and 2.385 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Hole Configuration Style
Hexagon longitudinal hole -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.692 inches first hole and 2.742 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-231-2707 MPN 69J27753-130Outer Wing Section
- 1560-01-480-4632 MPN DAA3410A060-023Aircraft Skin
- 1560-01-497-5076 MPN 9475952-01Aircraft Structural Component Support
- 1560-01-559-4002 MPN 160D217006-216AExplosion Suppressant Foam Segment
- 1560-01-587-3133 MPN 200925156-10Aircraft Fuel Tank Assembly
- 1560-01-050-5197 MPN 162D632000-1029Phenolic Block Assembly
- 1560-01-623-1165 MPN 162J611107-1009Aircraft Structural Panel
- 1560-01-624-3270 MPN 162J611501-1007Aircraft Stiffener Rib
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-007-0463 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7128010-01 | Ogden Air Logistics Center |