NSN 5306-00-008-3730
Wheel Bolt
1.375 inches fastener length, hexagon head style, between 0.150 inches and 0.163 inches head height, width between flats: between 0.428 inches and 0.438 inches .
Manufacturer part number 2585163-11 for national stock number 5306000083730.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-008-3730.
-
MPN or Model
2585163-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.375 inches -
Fastener Length
1.375 inches -
Head Style
Hexagon -
Head Height
Between 0.150 inches and 0.163 inches -
Width Between Flats
Between 0.428 inches and 0.438 inches -
Locking Feature
Patch threads or strip threads -
Thread Diameter
0.250 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
25.0 rockwell c and 34.0 rockwell c -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 4820-00-025-9356 MPN 810-4384536-82B36Disk Stem Assembly
- 5935-00-033-5655 MPN 9000S6502-74060REVCPC53Electrical Receptacle Connector
- 5905-00-107-9134 MPN 631637-5Film Fixed Resistor
- 5940-00-204-8966 MPN 401-4695443 ITELug Terminal
- 5950-00-229-6185 MPN S6307-471971ITEM3LElectrical Coil
- 5930-00-247-0674 MPN 477-6201-71055ALBox Switch
- 5935-00-258-1592 MPN 1756055Electrical Plug Connector
- 5905-00-279-9667 MPN 494-6307-706421PC124Inductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-008-3730 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2585163-11 | Naval Ship Systems Command |