NSN 5306-00-010-9210
Wheel Bolt
3.500 inches fastener length, square head style, between 0.278 inches and 0.316 inches head height, width between flats: between 0.603 inches and 0.625 inches .
Manufacturer part number MS35354-100 for national stock number 5306000109210.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-010-9210.
-
MPN or Model
MS35354-100
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.125 inches -
Fastener Length
3.500 inches -
Head Style
Square -
Head Height
Between 0.278 inches and 0.316 inches -
Width Between Flats
Between 0.603 inches and 0.625 inches -
Thread Diameter
0.438 inches -
Features Provided
Unfinished head -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Hardness Rating
95.0 rockwell b -
Material
Steel -
Material Specification
Sae gr 1 assn standard single material response or astm 1-307, gr a assn standard single material response -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-115-8510 MPN MS21027-H271Toggle Switch
- 5935-00-136-3846 MPN MS18174-1Electrical Connector Insert
- 5935-00-138-7600 MPN MS14005-212Electrical Connector Insert
- 5935-00-156-6686 MPN MS3106A28-17SZElectrical Plug Connector
- 5935-00-225-6472 MPN MS3108E20-18PElectrical Plug Connector
- 5950-00-236-5508 MPN MS90537-60Radio Frequency Coil
- 5935-00-241-5502 MPN MS3106B36-13SElectrical Plug Connector
- 5905-00-279-1912 MPN MS35045-148Composition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-010-9210 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35354-100 | Military Standards |