NSN 5306-00-011-3660
Wheel Bolt
4.750 inches fastener length, square head style, between 0.476 inches and 0.524 inches head height, width between flats: between 1.088 inches and 1.125 inches .
Manufacturer part number 113660 for national stock number 5306000113660.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-011-3660.
-
MPN or Model
113660
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.7 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.750 inches -
Fastener Length
4.750 inches -
Head Style
Square -
Head Height
Between 0.476 inches and 0.524 inches -
Width Between Flats
Between 1.088 inches and 1.125 inches -
Thread Diameter
0.750 inches -
Grip Length
3.000 inches -
Features Provided
Unfinished head -
Thready Qty Per Inch (tpi)
10 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Hardness Rating
95.0 rockwell b -
Material
Steel -
Material Specification
Sae j429 gr 1 assn standard single material response -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
1 type
More from these suppliers
- 4820-00-142-1321 MPN 1543111Vent Valve
- 5935-00-280-2114 MPN 6530942Electrical Receptacle Connector
- 4920-00-709-2368 MPN 6796855Aircraft Engine Maintenance Heater
- 4820-01-008-9409 MPN 120139Drain Cock
- 5305-00-012-4392 MPN 124392Hexagon Head Cap Screw
- 5305-00-273-5242 MPN 186923Socket Head Cap Screw
- 5305-00-286-1958 MPN 813511Machine Screw
- 5305-00-506-2365 MPN H7047Ball Bea Screw Assy
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-011-3660 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
113660 | General Motors Corp |
113660 | General Motors Llc |