NSN 5306-00-019-1810
Wheel Bolt
Between 0.344 inches and 0.406 inches fastener length, hexagon head style, between 0.125 inches and 0.135 inches head height, width between flats: between 0.428 inches and 0.437 inches .
Manufacturer part number 191810 for national stock number 5306000191810.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-019-1810.
-
MPN or Model
191810
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.312 inches -
Fastener Length
Between 0.344 inches and 0.406 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.135 inches -
Width Between Flats
Between 0.428 inches and 0.437 inches -
Locking Feature
Distortions bearing surface of head -
Thread Diameter
0.250 inches -
Features Provided
Unfinished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
96.0 rockwell b and 104.0 rockwell b -
Minimum Yield Strength
85000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium or zinc -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification 1st treatment response or qq-z-325, type 1, cl 3 federal specification 2nd treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-017-9894 MPN 179894Hexagon Head Cap Screw
- 5305-00-297-0120 MPN 583899Machine Screw
- 5305-00-531-0132 MPN 592797Setscrew
- 5930-00-392-3985 MPN 607827Push-pull Switch
- 5930-00-729-0485 MPN 7901739Push Switch
- 5935-00-850-0478 MPN 6799261-1Electrical Plug Connector
- 4820-01-303-6517 MPN 326 7384Valve
- 5305-00-011-0541 MPN 110541Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-019-1810 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
191810 | General Motors Llc |
191810 | General Motors Corp |
191810 | Army Weapons Command |