NSN 5306-00-021-4288
Wheel Bolt
Between 2.219 inches and 2.281 inches fastener length, hexagon head style, between 0.438 inches and 0.458 inches head height, width between flats: between 0.985 inches and 1.000 inches .
Manufacturer part number 214288 for national stock number 5306000214288.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-021-4288.
-
MPN or Model
214288
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.750 inches and 1.938 inches -
Fastener Length
Between 2.219 inches and 2.281 inches -
Head Style
Hexagon -
Head Height
Between 0.438 inches and 0.458 inches -
Width Between Flats
Between 0.985 inches and 1.000 inches -
Locking Feature
Distortions bearing surface of head -
Thread Diameter
0.750 inches -
Features Provided
Unfinished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
302.0 brinell standard and 351.0 brinell standard -
Minimum Yield Strength
130000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium or zinc -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification 1st treatment response or qq-z-325, type 1, cl 3 federal specification 2nd treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5945-00-353-9623 MPN 1869662Relay Armature
- 5935-00-862-9877 MPN 6792118Electrical Receptacle Connector
- 4820-01-564-3678 MPN 97365042Stop Diaphragm Valve
- 5305-00-013-2046 MPN 132046Machine Screw
- 5305-00-022-1615 MPN 221615Machine Screw
- 5305-00-042-1572 MPN 421572Machine Screw
- 5305-00-335-3712 MPN 2133500Screw
- 5305-00-753-4161 MPN 272473Hexagon Head Cap Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-021-4288 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
214288 | General Motors Llc |
214288 | General Motors Corp |