NSN 5306-00-022-0474
Wheel Bolt
Between 2.718 inches and 2.782 inches fastener length, hexagon head style, between 0.375 inches and 0.390 inches head height, width between flats: between 0.798 inches and 0.812 inches .
Manufacturer part number MS35763-892 for national stock number 5306000220474.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-022-0474.
-
MPN or Model
MS35763-892
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.375 inches and 1.562 inches -
Fastener Length
Between 2.718 inches and 2.782 inches -
Head Style
Hexagon -
Head Height
Between 0.375 inches and 0.390 inches -
Width Between Flats
Between 0.798 inches and 0.812 inches -
Locking Feature
Distortions bearing surface of head -
Thread Diameter
0.562 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
96.0 rockwell b and 104.0 rockwell b -
Minimum Yield Strength
85000 pounds per square inch -
Material
Steel comp 1035 -
Material Specification
Qq-s-634 federal specification single material response -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-001-5896 MPN MS25089-3ERPush Switch
- 5935-00-079-3985 MPN MS3108B32-6SElectrical Plug Connector
- 5935-00-102-8270 MPN MS3114P20-41SYElectrical Receptacle Connector
- 5905-00-110-0992 MPN RCR32G511JRComposition Fixed Resistor
- 5935-00-114-8708 MPN MS90558C32412PElectrical Receptacle Connector
- 5935-00-173-5687 MPN MS27473T12B4SElectrical Plug Connector
- 5940-00-187-5126 MPN MS25438-15Lug Terminal
- 5935-00-201-7969 MPN MS3106A18-1PElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-022-0474 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35763-892 | Military Standards |