NSN 5306-00-030-1673
Wheel Bolt
2.281 inches fastener length, hexagon head style, 0.312 inches head height, width between flats: 0.875 inches .
Manufacturer part number G155HH9-21 for national stock number 5306000301673.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-030-1673.
-
MPN or Model
G155HH9-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.906 inches -
Fastener Length
2.281 inches -
Head Style
Hexagon -
Head Height
0.312 inches -
Width Between Flats
0.875 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.562 inches -
Grip Length
1.375 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
38.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.031 inches first hole -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-004-3072 MPN A51B35000-30Horizontal Stabilizer
- 5935-00-054-1486 MPN GC810H1Electrical Plug Connector
- 5930-00-089-8275 MPN 128SCAV250-104Toggle Switch
- 1560-00-091-3175 MPN 89P1246-1Trough Blanket Assy
- 1680-00-133-9255 MPN 134SCF600-3Pull Control Assy
- 5930-00-150-6471 MPN 128SCP199-9Liquid Level Switch
- 1560-00-230-3405 MPN A51E20099-25Bleed Air Duct Shroud Half
- 5935-00-237-1565 MPN GC810JK1Electrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-030-1673 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
G155HH9-21 | Northrop Grumman Systems Corporation |