NSN 5306-00-042-8994
Wheel Bolt
Between 3.719 inches and 3.781 inches fastener length, hexagon head style, between 0.250 inches and 0.260 inches head height, width between flats: between 0.551 inches and 0.562 inches .
Manufacturer part number 428994 for national stock number 5306000428994.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-042-8994.
-
MPN or Model
428994
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.000 inches and 1.188 inches -
Fastener Length
Between 3.719 inches and 3.781 inches -
Head Style
Hexagon -
Head Height
Between 0.250 inches and 0.260 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Locking Feature
Distortions bearing surface of head -
Thread Diameter
0.375 inches -
Features Provided
Unfinished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
96.0 rockwell b and 104.0 rockwell b -
Minimum Yield Strength
85000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unc
More from these suppliers
- 4820-00-126-6077 MPN 8075353PC8065054Fluid Valve Stem
- 5905-00-218-1237 MPN 1516846Composition Fixed Resistor
- 4820-00-289-4375 MPN A7636Safety Relief Valve
- 4820-00-366-2767 MPN 8024846Fluid Valve Stem
- 4920-00-508-6382 MPN 6796346Test Adapter Set
- 4920-00-633-3439 MPN 6799104Aircraft Engine Maintenance Fixture
- 5940-00-808-7213 MPN 8597386-007Grounding Metallic Shielded Cable Ferrule
- 5305-00-010-0112 MPN 72625PC101Hexagon Head Cap Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-042-8994 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
428994 | General Motors Llc |
428994 | General Motors Corp |