NSN 5306-00-043-2172
Wheel Bolt
1.187 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number 756119-103 for national stock number 5306000432172.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-043-2172.
-
MPN or Model
756119-103
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
1.187 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Hole Diameter
0.046 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
0.812 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon longitudinal hole -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.125 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-003-1978 MPN 4J31123-126BWin Panel Assembly
- 1680-00-006-3143 MPN 695676-7Inboa Actuator Assy
- 1560-00-009-0790 MPN 4F72213-102ARotating Shaft Eye Bracket
- 1560-00-011-1835 MPN 4A99040-101AAir Turbine Valve Cover
- 1560-00-018-5261 MPN 780933Defogging Du Collar
- 1560-00-024-4220 MPN 207532Tip Tank Light Disconnect Block
- 5940-00-027-5756 MPN LS7000A6-5Terminal Board
- 1560-00-047-3806 MPN 174966RAircraft Structural Component Fitting
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-043-2172 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
756119-103 | Lockheed Martin Corporation |