NSN 5306-00-043-2552
Wheel Bolt
0.875 inches fastener length, hexagon head style, between 0.195 inches and 0.211 inches head height, width between flats: between 0.489 inches and 0.500 inches .
Manufacturer part number MS35306-33 for national stock number 5306000432552.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-043-2552.
-
MPN or Model
MS35306-33
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Fastener Length
0.875 inches -
Head Style
Hexagon -
Head Height
Between 0.195 inches and 0.211 inches -
Width Between Flats
Between 0.489 inches and 0.500 inches -
Thread Diameter
0.312 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Material
Steel -
Surface Treatment
Phosphate -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-017-8948 MPN 7873247Access Cov Computer
- 4920-00-570-6276 MPN 6799765B Alignment Fixture
- 4920-00-741-8520 MPN 6797618Aircraft Maintenance Fixture
- 4920-00-790-8499 MPN 6797678Aircraft Maintenance Fixture
- 5935-00-809-7986 MPN 8597650-610BElectrical Plug Connector
- 5930-00-850-5503 MPN 6799273-23Lever Switch
- 5935-00-877-3678 MPN 6720945Electrical Connector Insert
- 5905-00-894-8093 MPN 1928016Inductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-043-2552 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35306-33 | Military Standards |
432552 | General Motors Corp |