NSN 5306-00-044-4830
Wheel Bolt
0.500 inches fastener length, hexagon head style, between 0.195 inches and 0.211 inches head height, width between flats: between 0.489 inches and 0.500 inches .
Manufacturer part number A720031C050 for national stock number 5306000444830.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-044-4830.
-
MPN or Model
A720031C050
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.389 inches -
Fastener Length
0.500 inches -
Head Style
Hexagon -
Head Height
Between 0.195 inches and 0.211 inches -
Width Between Flats
Between 0.489 inches and 0.500 inches -
Thread Diameter
0.312 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 32.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Surface Treatment
Zinc -
Surface Treatment Specification
Qq-z-325, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-056-2483 MPN 1555768Rotary Switch
- 4820-00-066-3907 MPN 1977089Angle Valve
- 5985-00-070-8133 MPN 2322880Waveguide Assembly
- 5950-00-072-9616 MPN 2271349Radio Frequency Coil
- 5905-00-131-9729 MPN 1820811-084Composition Fixed Resistor
- 5935-00-155-3020 MPN 316019PC3Electrical Connector Retainer
- 5940-00-193-0721 MPN 2655384Terminal Board
- 4820-00-210-0931 MPN 731527PC4Check Valve
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-044-4830 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A720031C050 | Zf Industrieantriebe Witten Gmbh |
1611208PC36 | Navair And Navsea Managed |