NSN 5306-00-045-1876
Close Tolerance Hex Head Bolt
Shank area is shot peened.
Manufacturer part number 107DS303-2 for national stock number 5306000451876.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-045-1876.
-
MPN or Model
107DS303-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.682 inches and 0.765 inches -
Fastener Length
Between 1.117 inches and 1.147 inches -
Head Style
Hexagon -
Head Height
0.220 inches -
Width Between Flats
0.562 inches -
Grip Diameter
Between 0.3730 inches and 0.3740 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.357 inches and 0.377 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 -
Material Specification
Mil-s-5000 military specification single material response -
Precious Material
Silver -
Surface Treatment
Silver -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-022-7737 MPN A02S3102-1Engine Shaft Shield Assembly
- 1560-00-064-9205 MPN 114P8048-3Ac Bracket Assembly
- 1560-00-073-4038 MPN A02C7101-2Bracket Assembly
- 1560-00-073-4246 MPN A02E4045-4Heat And Vent Duct
- 1680-00-089-3954 MPN A02ES521-1Rearview Mirror Assembly
- 5930-00-443-5569 MPN 114C1271-19Switch Plate Assemb
- 5935-00-955-5560 MPN 114E3030-17Electrical Receptacle Connector
- 4920-00-959-6125 MPN 114E5987-4Flight Control System Test Set
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-045-1876 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
107DS303-2 | The Boeing Company |
107DS303-2 | The Boeing Company |