NSN 5306-00-045-1927
Close Tolerance Hex Head Bolt
Between 0.724 inches and 0.744 inches fastener length, hexagon head style, between 0.115 inches and 0.135 inches head height, width between flats: 0.438 inches .
Manufacturer part number 107D3241-1 for national stock number 5306000451927.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-045-1927.
-
MPN or Model
107D3241-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.474 inches and 0.526 inches -
Fastener Length
Between 0.724 inches and 0.744 inches -
Head Style
Hexagon -
Head Height
Between 0.115 inches and 0.135 inches -
Width Between Flats
0.438 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.218 inches and 0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Surface Finish
80.0 microinches grip -
Material
Steel comp 8740 or steel comp e4340 -
Material Specification
Mil-s-6049 military specification 1st material response or -1l-s-5000 military specification 2nd material response -
Precious Material And Location
silver -
Precious Material
Silver -
Surface Treatment
Silver -
Surface Treatment Specification
Pv-f-183, fscm 77272 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-137-6396 MPN A02RS600-13Rotary Actuator
- 1560-00-838-6570 MPN 107S4332-11Beam Assy
- 1560-00-875-1469 MPN 114S2703-1Tie Down Plate
- 1560-00-991-5405 MPN A02F1003-21Engine Armor Plate
- 1560-01-193-9660 MPN AO2R2859-14Bell Crank
- 1560-01-233-8349 MPN 145S2556-4Aircraft Floor
- 1560-01-354-2133 MPN 173E6001-3Aircraft Cover Rod Assembly
- 5930-01-371-8808 MPN GE-E-97324/GFlow Switch
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-045-1927 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
107D3241-1 | The Boeing Company |
107D3241-1 | The Boeing Company |